dmesg - 2017-04-05 22:45
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-31-generic (buildd@lgw01-43) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #50~14.04.1-Ubuntu SMP Wed Jul 13 01:07:32 UTC 2016 (Ubuntu 4.4.0-31.50~14.04.1-generic 4.4.13)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
BIOS-e820: [mem 0x000000001f000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000074f6dfff] usable
BIOS-e820: [mem 0x0000000074f6e000-0x0000000074f8efff] reserved
BIOS-e820: [mem 0x0000000074f8f000-0x000000007878efff] usable
BIOS-e820: [mem 0x000000007878f000-0x000000007881efff] type 20
BIOS-e820: [mem 0x000000007881f000-0x000000007b2bafff] reserved
BIOS-e820: [mem 0x000000007b2bb000-0x000000007b3bafff] ACPI NVS
BIOS-e820: [mem 0x000000007b3bb000-0x000000007b3fafff] ACPI data
BIOS-e820: [mem 0x000000007b3fb000-0x000000007bffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
efi: EFI v2.40 by INSYDE Corp.
efi: ACPI 2.0=0x7b3fa014 SMBIOS=0x7882f000 ESRT=0x78832918
esrt: Reserving ESRT space from 0x0000000078832918 to 0x0000000078832950.
SMBIOS 2.8 present.
DMI: Insyde CherryTrail/Type2 - Board Product Name, BIOS YV16_M1_170306 04/19/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 07E000000 mask FFE000000 uncachable
3 base 07D000000 mask FFF000000 uncachable
4 base 07C800000 mask FFF800000 uncachable
5 base 07C400000 mask FFFC00000 uncachable
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
BRK [0x03003000, 0x03003fff] PGTABLE
BRK [0x03004000, 0x03004fff] PGTABLE
BRK [0x03005000, 0x03005fff] PGTABLE
BRK [0x03006000, 0x03006fff] PGTABLE
BRK [0x03007000, 0x03007fff] PGTABLE
BRK [0x03008000, 0x03008fff] PGTABLE
RAMDISK: [mem 0x357b0000-0x36bcffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007B3FA014 000024 (v02 INSYDE)
ACPI: XSDT 0x000000007B3FA120 0000AC (v01 INSYDE INSYDE 00000003 01000013)
ACPI: FACP 0x000000007B3F5000 00010C (v05 INSYDE INSYDE 00000003 ACPI 00040000)
ACPI: DSDT 0x000000007B3D2000 01DA78 (v02 INSYDE INSYDE 00000003 ACPI 00040000)
ACPI: FACS 0x000000007B34D000 000040
ACPI: UEFI 0x000000007B3F9000 000236 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
ACPI: UEFI 0x000000007B3F7000 000042 (v01 INSYDE INSYDE 00000000 ACPI 00040000)
ACPI: HPET 0x000000007B3F4000 000038 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
ACPI: LPIT 0x000000007B3F3000 000104 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
ACPI: APIC 0x000000007B3F2000 00006C (v03 INSYDE INSYDE 00000003 ACPI 00040000)
ACPI: MCFG 0x000000007B3F1000 00003C (v01 INSYDE INSYDE 00000003 ACPI 00040000)
ACPI: PRAM 0x000000007B3F0000 000030 (v01 INSYDE INSYDE 00000003 ACPI 00040000)
ACPI: SSDT 0x000000007B3D1000 000645 (v01 INSYDE CpuDptf 00000003 ACPI 00040000)
ACPI: SSDT 0x000000007B3CD000 003FCE (v01 INSYDE DptfTab 00000003 ACPI 00040000)
ACPI: SSDT 0x000000007B3CC000 000058 (v01 INSYDE LowPwrM 00000003 ACPI 00040000)
ACPI: SSDT 0x000000007B3CB000 000763 (v01 INSYDE CpuPm 00003000 ACPI 00040000)
ACPI: SSDT 0x000000007B3CA000 00028D (v01 INSYDE Cpu0Tst 00003000 ACPI 00040000)
ACPI: SSDT 0x000000007B3C9000 00017A (v01 INSYDE ApTst 00003000 ACPI 00040000)
ACPI: CSRT 0x000000007B3F6000 00014C (v00 INSYDE INSYDE 00000003 ACPI 00040000)
ACPI: FPDT 0x000000007B3C7000 000044 (v01 INSYDE INSYDE 00000002 ACPI 00040000)
ACPI: BGRT 0x000000007B3C8000 000038 (v01 INSYDE INSYDE 00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007bffffff]
NODE_DATA(0) allocated [mem 0x78491000-0x78495fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x000000007bffffff]
Normal empty
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000008efff]
node 0: [mem 0x0000000000090000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000001effffff]
node 0: [mem 0x0000000020200000-0x0000000074f6dfff]
node 0: [mem 0x0000000074f8f000-0x000000007878efff]
node 0: [mem 0x000000007b3fb000-0x000000007bffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007bffffff]
On node 0 totalpages: 491793
DMA zone: 64 pages used for memmap
DMA zone: 23 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 7872 pages used for memmap
DMA32 zone: 487795 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x7cc00000-0x7ebfffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x1f000000-0x201fffff]
PM: Registered nosave memory: [mem 0x74f6e000-0x74f8efff]
PM: Registered nosave memory: [mem 0x7878f000-0x7881efff]
PM: Registered nosave memory: [mem 0x7881f000-0x7b2bafff]
PM: Registered nosave memory: [mem 0x7b2bb000-0x7b3bafff]
PM: Registered nosave memory: [mem 0x7b3bb000-0x7b3fafff]
e820: [mem 0x7ec00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff880078200000 s98008 r8192 d28968 u524288
pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 483834
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1865240K/1967172K available (8174K kernel code, 1291K rwdata, 3956K rodata, 1484K init, 1292K bss, 101932K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:1024 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 1439.933 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 2879.86 BogoMIPS (lpj=5759732)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 7 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81eb7000 - ffffffff81ebe000)
ftrace: allocating 32026 entries in 126 pages
smpboot: Max logical packages: 1
smpboot: APIC(0) Converting physical 0 to logical package 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Atom(TM) x5-Z8350 CPU @ 1.44GHz (family: 0x6, model: 0x4c, stepping: 0x4)
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000ffffffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (11519.46 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x7b2bb000-0x7b3bafff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 6:43:28, date: 04/05/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880076379800 00059C (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88007B816200 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150930/hwxface-580)
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [WWPR] (off)
ACPI: Power Resource [WWPR] (off)
ACPI: Power Resource [WWPR] (off)
ACPI: Power Resource [WWPR] (off)
ACPI: Power Resource [WWPR] (off)
ACPI: Power Resource [WWPR] (off)
ACPI: Power Resource [CLK2] (on)
ACPI: Power Resource [CLK4] (on)
ACPI: Power Resource [P28P] (off)
ACPI: Power Resource [P18P] (off)
ACPI: Power Resource [P12P] (off)
ACPI: Power Resource [CLK3] (on)
ACPI: Power Resource [CLK4] (on)
ACPI: Power Resource [CLK2] (on)
ACPI: Power Resource [CLK1] (on)
ACPI: Power Resource [CLK0] (on)
ACPI: Power Resource [CLK1] (on)
ACPI: Power Resource [P28X] (off)
ACPI: Power Resource [P18X] (off)
ACPI: Power Resource [CLK5] (off)
ACPI: Power Resource [P33P] (off)
ACPI: Power Resource [P65P] (off)
ACPI: Power Resource [ID3C] (on)
ACPI: Power Resource [P06X] (off)
ACPI: Power Resource [P12X] (off)
ACPI: Power Resource [P28P] (off)
ACPI: Power Resource [P18P] (off)
ACPI: Power Resource [P19X] (off)
ACPI: Power Resource [P28T] (off)
ACPI: Power Resource [P18D] (off)
ACPI: Power Resource [P18T] (off)
ACPI: Power Resource [P3P3] (off)
ACPI: Power Resource [P12T] (off)
ACPI: Power Resource [P28W] (off)
ACPI: Power Resource [P18W] (off)
ACPI: Power Resource [P12W] (off)
ACPI: Power Resource [P33W] (off)
ACPI: Power Resource [P33X] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x20000000-0x201fffff window]
pci_bus 0000:00: root bus resource [mem 0x7cc00001-0x7ec00000 window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
pci 0000:00:02.0: [8086:22b0] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f]
pci 0000:00:03.0: [8086:22b8] type 00 class 0x048000
pci 0000:00:03.0: reg 0x10: [mem 0x91000000-0x913fffff]
pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
pci 0000:00:0b.0: reg 0x10: [mem 0x91818000-0x91818fff 64bit]
pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x91800000-0x9180ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
pci 0000:00:1a.0: reg 0x10: [mem 0x91700000-0x917fffff]
pci 0000:00:1a.0: reg 0x14: [mem 0x91600000-0x916fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
e820: reserve RAM buffer [mem 0x74f6e000-0x77ffffff]
e820: reserve RAM buffer [mem 0x7878f000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x0400-0x047f] has been reserved
system 00:00: [io 0x0500-0x05fe] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:02: [mem 0x9183a000-0x9183afff] has been reserved
system 00:02: [mem 0x91838000-0x91838fff] has been reserved
system 00:02: [mem 0x91836000-0x91836fff] has been reserved
system 00:02: [mem 0x91825000-0x91825fff] has been reserved
system 00:02: [mem 0x91823000-0x91823fff] has been reserved
system 00:02: [mem 0x91821000-0x91821fff] has been reserved
system 00:02: [mem 0x9181f000-0x9181ffff] has been reserved
system 00:02: [mem 0x9181d000-0x9181dfff] has been reserved
system 00:02: [mem 0x9181b000-0x9181bfff] has been reserved
system 00:02: [mem 0x91819000-0x91819fff] has been reserved
system 00:02: [mem 0x91834000-0x91834fff] has been reserved
system 00:02: [mem 0x91832000-0x91832fff] has been reserved
system 00:02: [mem 0x91830000-0x91830fff] has been reserved
system 00:02: [mem 0x9182e000-0x9182efff] has been reserved
system 00:02: [mem 0x9182c000-0x9182cfff] has been reserved
system 00:02: [mem 0x9182a000-0x9182afff] has been reserved
system 00:02: [mem 0x91828000-0x91828fff] has been reserved
system 00:02: [mem 0x91826000-0x91826fff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
system 00:03: [mem 0xfed80000-0xfedbffff] could not be reserved
system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: resource 11 [mem 0x20000000-0x201fffff window]
pci_bus 0000:00: resource 12 [mem 0x7cc00001-0x7ec00000 window]
pci_bus 0000:00: resource 13 [mem 0x80000000-0xdfffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20608K (ffff8800357b0000 - ffff880036bd0000)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1491374609.128:1): initialized
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0x80000000, mapped to 0xffffc90000800000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x33000020
intel_idle: v0.4.1 model 0x4C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (0 C)
GHES: HEST is not enabled!
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-31-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 7 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-31-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Can't read CTR while initializing i8042
i8042: probe of i8042 failed with error -5
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x406c4, pf=0x1, revision=0x406
microcode: CPU1 sig=0x406c4, pf=0x1, revision=0x406
microcode: CPU2 sig=0x406c4, pf=0x1, revision=0x406
microcode: CPU3 sig=0x406c4, pf=0x1, revision=0x406
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 6e1dec312b99cf2987117ed2153b9a730dee12a7'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 13:679:720
block loop0: hash matches
acpi BCM2E64:00: hash matches
rtc_cmos 00:04: setting system clock to 2017-04-05 06:43:30 UTC (1491374610)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1484K (ffffffff81d44000 - ffffffff81eb7000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 4K (ffff8800027ff000 - ffff880002800000)
Freeing unused kernel memory: 140K (ffff880002bdd000 - ffff880002c00000)
systemd-udevd[134]: starting version 204
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-acpi 80860F14:00: No vmmc regulator found
sdhci-acpi 80860F14:00: No vqmmc regulator found
mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
sdhci-acpi 80860F14:03: failed to setup card detect gpio
sdhci-acpi 80860F14:03: No vmmc regulator found
sdhci-acpi 80860F14:03: No vqmmc regulator found
mmc1: SDHCI controller on ACPI [80860F14:03] using ADMA
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
usb 1-2: new high-speed USB device number 2 using xhci_hcd
mmc0: MAN_BKOPS_EN bit is not set
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 AWPD3R 14.6 GiB
mmcblk0boot0: mmc0:0001 AWPD3R partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 AWPD3R partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 AWPD3R partition 3 4.00 MiB
mmcblk0: p1 p2 p3
tsc: Refined TSC clocksource calibration: 1439.953 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x14c18e756e4, max_idle_ns: 440795259570 ns
usb 1-2: New USB device found, idVendor=1a40, idProduct=0101
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB 2.0 Hub
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
EXT4-fs (mmcblk0p2): write access will be enabled during recovery
usb 1-3: new high-speed USB device number 3 using xhci_hcd
EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
EXT4-fs (mmcblk0p2): 3 orphan inodes deleted
EXT4-fs (mmcblk0p2): recovery complete
usb 1-3: New USB device found, idVendor=0bda, idProduct=8152
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: USB 10/100 LAN
usb 1-3: Manufacturer: Realtek
usb 1-3: SerialNumber: 00E04C36221C
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
usb 1-2.3: new low-speed USB device number 4 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=093a, idProduct=2510
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: USB Optical Mouse
usb 1-2.3: Manufacturer: PixArt
usb 1-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-4: new low-speed USB device number 5 using xhci_hcd
usb 1-4: New USB device found, idVendor=04d9, idProduct=1603
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: USB Keyboard
usb 1-4: Manufacturer:
usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-2.4: new full-speed USB device number 6 using xhci_hcd
random: init urandom read with 37 bits of entropy available
clocksource: Switched to clocksource tsc
usb 1-2.4: New USB device found, idVendor=0d8c, idProduct=013c
usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4: Product: USB PnP Sound Device
usb 1-2.4: Manufacturer: C-Media Electronics Inc.
init: plymouth-upstart-bridge main process (201) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (211) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (214) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 1966076k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:1966076k SSFS
systemd-udevd[333]: starting version 204
8086228A:00: ttyS4 at MMIO 0x91822000 (irq = 39, base_baud = 2764800) is a 16550A
8086228A:01: ttyS5 at MMIO 0x91820000 (irq = 40, base_baud = 2764800) is a 16550A
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
[drm] Initialized drm 1.1.0 20060810
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
input: Intel HID events as /devices/pci0000:00/INT33D5:00/input/input2
[drm] Memory usable by graphics device = 2048M
checking generic (80000000 7f0000) vs hw (80000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol BCM registered
Bluetooth: HCI UART protocol QCA registered
EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:2a: registered as cooling_device5
usbcore: registered new interface driver r8152
acpi device:2b: registered as cooling_device6
acpi device:2c: registered as cooling_device7
acpi device:2d: registered as cooling_device8
acpi device:2e: registered as cooling_device9
acpi device:2f: registered as cooling_device10
acpi device:30: registered as cooling_device11
acpi device:31: registered as cooling_device12
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
usbcore: registered new interface driver cdc_ether
[drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver snd-usb-audio
intel_sst_acpi 808622A8:00: No matching machine driver found
[drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 1-3: reset high-speed USB device number 3 using xhci_hcd
i2c_designware 808622C1:06: I2C bus managed by PUNIT
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i2c_designware 808622C1:06: punit semaphore timed out, resetting
i2c_designware 808622C1:06: PUNIT SEM: 2
------------[ cut here ]------------
WARNING: CPU: 0 PID: 371 at /build/linux-lts-xenial-gUF4JR/linux-lts-xenial-4.4.0/drivers/i2c/busses/i2c-designware-baytrail.c:112 baytrail_i2c_acquire+0x128/0x1d0 [i2c_designware_platform]()
Modules linked in: nls_iso8859_1 snd_usb_audio usbhid hid cdc_ether usbnet r8152 mii snd_usbmidi_lib snd_hwdep hci_uart snd_intel_sst_acpi snd_intel_sst_core snd_soc_sst_mfld_platform btbcm snd_soc_core btqca snd_compress ac97_bus snd_pcm_dmaengine btintel dw_dmac snd_pcm dw_dmac_core 8250_fintek i915 bluetooth snd_seq_midi snd_seq_midi_event snd_rawmidi intel_hid sparse_keymap snd_seq i2c_designware_platform(+) i2c_designware_core rfkill_gpio snd_seq_device snd_timer video drm_kms_helper drm soc_button_array snd int3403_thermal int3400_thermal acpi_thermal_rel i2c_algo_bit fb_sys_fops mei_txe syscopyarea parport_pc sysfillrect pinctrl_cherryview sysimgblt processor_thermal_device mei int340x_thermal_zone acpi_pad intel_soc_dts_iosf ppdev lpc_ich soundcore mac_hid spi_pxa2xx_platform pwm_lpss_platform pwm_lpss 8250_dw lp parport mmc_block fjes sdhci_acpi sdhci
CPU: 0 PID: 371 Comm: systemd-udevd Not tainted 4.4.0-31-generic #50~14.04.1-Ubuntu
Hardware name: Insyde CherryTrail/Type2 - Board Product Name, BIOS YV16_M1_170306 04/19/2016
0000000000000000 ffff8800775bba60 ffffffff813d433c 0000000000000000
ffffffffc00b5708 ffff8800775bba98 ffffffff8107d776 ffff880077383818
00000000fffedf61 00000000fffedf48 ffff88007b964410 0000000000000000
Call Trace:
[] dump_stack+0x63/0x87
[] warn_slowpath_common+0x86/0xc0
[] warn_slowpath_null+0x1a/0x20
[] baytrail_i2c_acquire+0x128/0x1d0 [i2c_designware_platform]
[] i2c_dw_init+0x23/0x360 [i2c_designware_core]
[] i2c_dw_probe+0x52/0x170 [i2c_designware_core]
[] dw_i2c_plat_probe+0x1bc/0x3d0 [i2c_designware_platform]
[] platform_drv_probe+0x3b/0xa0
[] driver_probe_device+0x21b/0x470
[] __driver_attach+0x85/0x90
[] ? driver_probe_device+0x470/0x470
[] bus_for_each_dev+0x5d/0x90
[] driver_attach+0x1e/0x20
[] bus_add_driver+0x1d0/0x290
[] ? 0xffffffffc00be000
[] driver_register+0x60/0xe0
[] __platform_driver_register+0x36/0x40
[] dw_i2c_init_driver+0x17/0x1000 [i2c_designware_platform]
[] do_one_initcall+0xcd/0x1f0
[] ? __vunmap+0xa6/0xf0
[] ? kmem_cache_alloc_trace+0x1ad/0x220
[] ? do_init_module+0x27/0x1d2
[] do_init_module+0x60/0x1d2
[] load_module+0x141c/0x1b00
[] ? __symbol_put+0x40/0x40
[] ? kernel_read+0x41/0x60
[] SYSC_finit_module+0x7e/0xa0
[] SyS_finit_module+0xe/0x10
[] entry_SYSCALL_64_fastpath+0x16/0x75
---[ end trace 1ec9cf241e744c2a ]---
i2c_designware 808622C1:06: couldn't acquire bus ownership
i2c_designware: probe of 808622C1:06 failed with error -110
r8152 1-3:1.0 eth0: v1.08.2
nfc: nfc_init: NFC Core ver 0.1
NET: Registered protocol family 39
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
SSE version of gcm_enc/dec engaged.
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
audit: type=1400 audit(1491374613.538:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=561 comm="apparmor_parser"
audit: type=1400 audit(1491374613.538:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=561 comm="apparmor_parser"
audit: type=1400 audit(1491374613.538:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=561 comm="apparmor_parser"
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
input: gpio-keys as /devices/platform/gpio-keys.1.auto/input/input4
input: gpio-keys as /devices/platform/gpio-keys.2.auto/input/input5
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:093A:2510.0001/input/input6
hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2.3/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04D9:1603.0002/input/input7
audit: type=1400 audit(1491374613.838:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=607 comm="apparmor_parser"
audit: type=1400 audit(1491374613.838:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=607 comm="apparmor_parser"
audit: type=1400 audit(1491374613.838:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=607 comm="apparmor_parser"
audit: type=1400 audit(1491374613.842:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=607 comm="apparmor_parser"
audit: type=1400 audit(1491374613.842:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=607 comm="apparmor_parser"
audit: type=1400 audit(1491374613.842:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=607 comm="apparmor_parser"
hid-generic 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:14.0-4/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:04D9:1603.0003/input/input8
hid-generic 0003:04D9:1603.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:14.0-4/input1
input: C-Media Electronics Inc. USB PnP Sound Device as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.3/0003:0D8C:013C.0004/input/input9
random: nonblocking pool is initialized
hid-generic 0003:0D8C:013C.0004: input,hidraw3: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device] on usb-0000:00:14.0-2.4/input3
init: failsafe main process (623) killed by TERM signal
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
audit_printk_skb: 3 callbacks suppressed
audit: type=1400 audit(1491374615.170:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=867 comm="apparmor_parser"
audit: type=1400 audit(1491374615.170:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=867 comm="apparmor_parser"
audit: type=1400 audit(1491374615.170:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=867 comm="apparmor_parser"
audit: type=1400 audit(1491374615.174:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=867 comm="apparmor_parser"
audit: type=1400 audit(1491374615.174:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=867 comm="apparmor_parser"
audit: type=1400 audit(1491374615.174:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=867 comm="apparmor_parser"
audit: type=1400 audit(1491374615.206:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=868 comm="apparmor_parser"
audit: type=1400 audit(1491374615.206:19): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=868 comm="apparmor_parser"
audit: type=1400 audit(1491374615.206:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=868 comm="apparmor_parser"
audit: type=1400 audit(1491374615.206:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=868 comm="apparmor_parser"
i2c i2c-0: i2c read failed
init: Failed to spawn whoopsie main process: unable to execute: No such file or directory
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1133) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
audit_printk_skb: 120 callbacks suppressed
audit: type=1400 audit(1491375030.410:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=4058 comm="apparmor_parser"
audit: type=1400 audit(1491375030.410:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4058 comm="apparmor_parser"
audit: type=1400 audit(1491375030.410:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=4058 comm="apparmor_parser"
usb 1-2.3: USB disconnect, device number 4
usb 1-4: USB disconnect, device number 5
usb 1-2.3: new low-speed USB device number 7 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=093a, idProduct=2510
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: USB Optical Mouse
usb 1-2.3: Manufacturer: PixArt
usb 1-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:093A:2510.0005/input/input10
hid-generic 0003:093A:2510.0005: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2.3/input0
usb 1-4: new low-speed USB device number 8 using xhci_hcd
usb 1-4: New USB device found, idVendor=04d9, idProduct=1603
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: USB Keyboard
usb 1-4: Manufacturer:
usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04D9:1603.0006/input/input11
hid-generic 0003:04D9:1603.0006: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:14.0-4/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:04D9:1603.0007/input/input12
hid-generic 0003:04D9:1603.0007: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:14.0-4/input1
usb 1-2.3: USB disconnect, device number 7
usb 1-4: USB disconnect, device number 8
usb 1-2.3: new low-speed USB device number 9 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=093a, idProduct=2510
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: USB Optical Mouse
usb 1-2.3: Manufacturer: PixArt
usb 1-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:093A:2510.0008/input/input13
hid-generic 0003:093A:2510.0008: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2.3/input0
usb 1-4: new low-speed USB device number 10 using xhci_hcd
usb 1-4: New USB device found, idVendor=04d9, idProduct=1603
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: USB Keyboard
usb 1-4: Manufacturer:
usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04D9:1603.0009/input/input14
hid-generic 0003:04D9:1603.0009: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:14.0-4/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:04D9:1603.000A/input/input15
hid-generic 0003:04D9:1603.000A: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:14.0-4/input1
usb 1-2.3: USB disconnect, device number 9
usb 1-4: USB disconnect, device number 10
usb 1-2.3: new low-speed USB device number 11 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=04d9, idProduct=1603
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: USB Keyboard
usb 1-2.3: Manufacturer:
usb 1-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-2.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:04D9:1603.000B/input/input16
hid-generic 0003:04D9:1603.000B: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:14.0-2.3/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:04D9:1603.000C/input/input17
hid-generic 0003:04D9:1603.000C: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:14.0-2.3/input1
usb 1-4: new low-speed USB device number 12 using xhci_hcd
usb 1-4: New USB device found, idVendor=093a, idProduct=2510
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: USB Optical Mouse
usb 1-4: Manufacturer: PixArt
usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:093A:2510.000D/input/input18
hid-generic 0003:093A:2510.000D: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-4/input0
systemd-hostnamed[4999]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[5475]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 1-4: USB disconnect, device number 12
usb 1-2.3: USB disconnect, device number 11
usb 1-4: new low-speed USB device number 13 using xhci_hcd
usb 1-4: New USB device found, idVendor=04d9, idProduct=1603
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: USB Keyboard
usb 1-4: Manufacturer:
usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04D9:1603.000E/input/input19
hid-generic 0003:04D9:1603.000E: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:14.0-4/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:04D9:1603.000F/input/input20
hid-generic 0003:04D9:1603.000F: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:14.0-4/input1
usb 1-2.3: new low-speed USB device number 14 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=093a, idProduct=2510
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: USB Optical Mouse
usb 1-2.3: Manufacturer: PixArt
usb 1-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:093A:2510.0010/input/input21
hid-generic 0003:093A:2510.0010: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2.3/input0
systemd-hostnamed[6763]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 1-4: USB disconnect, device number 13
usb 1-2.3: USB disconnect, device number 14
usb 1-4: new low-speed USB device number 15 using xhci_hcd
usb 1-4: New USB device found, idVendor=04d9, idProduct=1603
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: USB Keyboard
usb 1-4: Manufacturer:
usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04D9:1603.0011/input/input22
hid-generic 0003:04D9:1603.0011: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:14.0-4/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:04D9:1603.0012/input/input23
hid-generic 0003:04D9:1603.0012: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:14.0-4/input1
usb 1-4: USB disconnect, device number 15
usb 1-4: new low-speed USB device number 16 using xhci_hcd
usb 1-4: New USB device found, idVendor=04d9, idProduct=1603
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: USB Keyboard
usb 1-4: Manufacturer:
usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04D9:1603.0013/input/input24
hid-generic 0003:04D9:1603.0013: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:14.0-4/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:04D9:1603.0014/input/input25
hid-generic 0003:04D9:1603.0014: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:14.0-4/input1
usb 1-2.3: new low-speed USB device number 17 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=093a, idProduct=2510
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: USB Optical Mouse
usb 1-2.3: Manufacturer: PixArt
usb 1-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:093A:2510.0015/input/input26
hid-generic 0003:093A:2510.0015: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2.3/input0
systemd-hostnamed[7702]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 1-4: USB disconnect, device number 16
usb 1-2.3: USB disconnect, device number 17
usb 1-2.3: new low-speed USB device number 18 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=093a, idProduct=2510
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: USB Optical Mouse
usb 1-2.3: Manufacturer: PixArt
usb 1-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:093A:2510.0016/input/input27
hid-generic 0003:093A:2510.0016: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2.3/input0
usb 1-4: new low-speed USB device number 19 using xhci_hcd
usb 1-4: New USB device found, idVendor=04d9, idProduct=1603
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: USB Keyboard
usb 1-4: Manufacturer:
usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04D9:1603.0017/input/input28
hid-generic 0003:04D9:1603.0017: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:14.0-4/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:04D9:1603.0018/input/input29
hid-generic 0003:04D9:1603.0018: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:14.0-4/input1
perf interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
systemd-hostnamed[3634]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
usb 1-2.3: USB disconnect, device number 18
usb 1-4: USB disconnect, device number 19
usb 1-4: new low-speed USB device number 20 using xhci_hcd
usb 1-4: New USB device found, idVendor=04d9, idProduct=1603
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: USB Keyboard
usb 1-4: Manufacturer:
usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04D9:1603.0019/input/input30
hid-generic 0003:04D9:1603.0019: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:14.0-4/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:04D9:1603.001A/input/input31
hid-generic 0003:04D9:1603.001A: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:14.0-4/input1
usb 1-2.3: new low-speed USB device number 21 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=093a, idProduct=2510
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: USB Optical Mouse
usb 1-2.3: Manufacturer: PixArt
usb 1-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:093A:2510.001B/input/input32
hid-generic 0003:093A:2510.001B: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2.3/input0
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* failed to enable link training
[drm:intel_dp_link_training_channel_equalization [i915]] *ERROR* failed to start channel equalization
usb 1-2.3: USB disconnect, device number 21
usb 1-4: USB disconnect, device number 20